Page
45
of
73
VastraJet K2
RIPPING AND PRINTING
Ripping is an independent process which converts a raw image file into the machine-readable format and get the
file ready for printing. The Rip software supports the tiff, jpeg, eps, psd, bmp file formats. After ripping the image
file, the output file will be in
“.prt”
or
“.prn”
file format. Thus, you should first rip the image file before printing and
then issue the Print command. While ripping, the color profiles are used to automatically perform the color
corrections in the image.
You can print an image on the selected fabric simply by clicking on the
Print Job
button available on the
Quick Access
Toolbar,
as shown below:
Fig 57: Issuing the Print Job Command
After issuing the Print command, the printing gets started and its progress details displays in the Job Information
area, as shown below:
Fig 58: Displaying the Printing Details
DPI AND MODE
There are different combination of print modes and resources, as shown through the table:
Print DPI
Print Passes
540x720
2
540x1080
3
540x1440
4
