Page
15
of
73
VastraJet K2
Step 6:
Adjust the pressure roller position (up and down) using the back-HMI screen, as shown below:
Fig 16: Adjusting the Pressure Roller
Step 7:
Load the fabric as per the path given below:
Fig 17: Displaying the Fabric Path
Note
: Please be careful while loading the fabric as there are chances of serious injuries (like pinching finger or hand).
Step 8:
Move the belt using the
Belt Movement
option available on the Back-HMI (Refer to Fig 16) until the fabric
reached to the print origin.
Now, the fabric is loaded successfully.
