Page
34
of
73
VastraJet K2
SETTING MEDIA THICKNESS
To change the media thickness, open the Z parameter window by clicking on the
Measure Paper Height
icon on the
Quick Access Toolbar
as shown below:
Fig 39: Setting Media Thickness
The
Z Parameter
screen appears as shown below:
Fig 40: Setting the Print Head Height
A default value of media (fabric) thickness is 3.89 for 0.1
–
1.0 mm fabric. In case, the fabric thickness gets changed,
then user needs to update the default value by adding or subtracting in it. After updating the value, please perform
the bi-direction calibration and correct it, if required.
Note
: Please don’t disturb other settings on the above window (Fig 4
0).
