there are studs that do not align with a mounting hole on the motherboard, it is
recommended that you remove that stud to prevent the possibility of a short
circuit.
Carefully place the motherboard onto the studs/spacers located inside the
chassis.
Align the mounting holes with the studs/spacers.
Align the connectors to the I/O shield.
Ensure that the fan assembly is aligned with the chassis vents according to the
fan assembly instruction.
Secure the motherboard with a minimum of eight-to-ten screws.
5-2-3 Connecting header and Setting Switches
This section takes you through all the connections and switch settings
necessary on the motherboard. This will include:
Power Connections
¾
24-pin ATX power
¾
8-pin ATX 12V power
Internal Headers
¾
Front panel
¾
USB Headers
¾
Audio
Serial ATA III
Chassis Fans
Rear panel USB 2.0 Adapter
Expansion slots
33
Hardware Installation