4. Press the APU down firmly into the socket and close the lever. As the APU is
likely to move while the lever is being closed, always close the lever with your
fingers pressing tightly on top of the APU to make sure the APU is properly and
completely embedded into the socket.
5. Locate the CPU fan connector on the motherboard.
6. Position the cooling set onto the retention mechanism. Hook one end of the
clip to hook first.
7. Then press down the other end of the clip to fasten the cooling set on the top
of the retention mechanism. Locate the Fix Lever and lift up it.
8. Fasten down the lever.
9. Attach the APU Fan cable to the APU fan connector on the motherboard.
Installing Memory DIMMs
Your new motherboard has 2 slots for DDR4 memory. They support dual
channel DDR4 memory technology. There must be at least one memory bank
populated to ensure normal operation. Use the following the recommendations
for installing memory.
9
One DIMM:
Install into DIMM1. You can install the DIMM into any slot,
however, slot 1 is preferred.
9
2 DIMMs:
Install into DIMM1&DIMM3 slot, or DIMM2&DIMM4 slot, to build
dual channel.
9
3 DIMMs: don t install 3 DIMMs may cause fault.
9
4 DIMMs: Install into DIMM1ㄋDIMM2ㄋDIMM3ㄋDIMM4 slot.
31
Ｈａｒｄｗａｒｅ Ｉｎｓｔａｌｌａｔｉｏｎ
