Device power-up delay
This option sets the power delay on the USB device and can be accessed
later. Set to "Auto", the data is obtained from the device; set to "Manual",
the user enters the time by itself.
Onboard Device Configuration Onboard Device settings
Launch PXE OpROM
Set up no disk boot. Options:Disabled, Uefi and Legacy.
Onboard Lan Controller
Turn on or off Onboard Lan Controller.Options:Disabled, Enabled and
Auto.
HDMI Audio
Turn on or off the HDMI audio controller.Options:Auto, Disabled and
Enabled.
PS/2 Swap
Set PS/2 port function. Options:Auto (automatic), PS2 MS Only (PS2 mouse
only), PS2 KB Only (PS2 keyboard only).
LED Light Mode
Set the backlight mode of the main board LED. Options:Auto, Loop Mode,
Red Mode, Green Mode and Blue Mode.
M.2 TYPE Select
Set the support mode of M.2 slot . Options:M.2 NVMe/PCIe,M.2 SATA.
Advanced Power Management configuration
PS/2 Keyboard Power on
Set the PS/2 keyboard to boot. Options: Disabled, AnyKey (any key),
Password (password).
PS/2 Mouse Power on
Set the PS/2 mouse to boot. Options: Disabled, Enabled.
USB Keyboard/ Mouse wakeup
Set the USB Keyboard/ Mouse to wakeup. Options: Disabled, Enabled.
CVN X570 GAMING PRO V14
50
