Turbo Mode
Set whether to turn on CPU dynamic overclocking technology.
Options:Disabled and Enabled.
SATA Configuration SATA Setup
SATA/M.2 SATA Port
Display the connections of the SATA/M.2 SATA port.
USB Configuration (USB settings)
Legacy USB Support
Open or close the traditional USB device function. The traditional USB is
an old 1.1USB device, and both the USB keyboard and the mouse belong
to the traditional USB. When using the USB keyboard and mouse, this
option needs to be set to "Enabled". Options: Enabled, Disabled, Auto.
XHCI Hand-off
This project is used to start an operating system that supports no "XHCI
hand-off" functionality. Options: Disabled, Enabled.
EHCI Hand-off
This project is used to start an operating system that supports no "EHCI
hand-off" functionality. Options: Disabled, Enabled.
USB Mass Storage Driver Support
Set USB to support large capacity memory. Options: Disabled, Enabled.
USB transfer time-out
This option sets the longest time for a data transmission on the USB2.0
bus. If the transmission is not completed during this time, the error is
given to the EFI. This setting only works on EFI, and has no effect on the
USB driver under OS. Options: 1 Sec, 5 Sec, 10 Sec, 20 Sec.
Device reset time-out
This option sets the longest time needed to store device reset on the
USB2.0 bus. During this time, EFI will check whether the storage device
can accept instructions. If the timeout is over, the storage device is
considered to be wrong. Options: 10 Sec, 20 Sec, 30 Sec, 40 Sec.
49
ＢＩＯＳ Ｓｅｔｔｉｎｇ
