5-3-8 OC Drive OverClock Settings
DRAM Voltage
Set DRAM voltage.
CPU Fid Boost
CPU frequency doubling adjustment, if the CPU allows to adjust the
frequency doubling, this can take effect, and can adjust the CPU frequency
doubling in a certain range.
CPU Vid Boost
CPU voltage regulation, if the CPU used allows voltage regulation, this can
take effect, and can adjust the CPU voltage in a certain range.
Memory Configuration (memory settings)
Click this menu, and the following options will appear:
Memory Overclock
Set memory overclocking.
Options:Auto (automatic), Manual (manual,
for memory overclocking settings), Easy Mode .
When set to "Manual", the following options appear:
Memory Clock Speed
Set Memory Frequency.The following can be used as a reference for
memory overfrequency:
CAS Latency Time tCL
This controls the C A S latency, which determines the latency (in the time
period) when the SDRAM starts reading after receiving the instruction.
RAS/ CAS Delay tRCD
This project is used to select the time lag between RAS (Row Address
Strobe) and CAS (Column Address Strobe) when reading and writing data
at the same bank. The shorter the set period, the faster the DRAM will run.
ROW Precharge Time tRP
This project is used to control how long after the Precharge command is
sent out by SDRAM, the command must not be sent out again. It is
recommended that you use default values to keep the system stable.
Options:[2Clocks] [3Clocks] [4 Clocks] [5 Clocks] [6 Clocks].
55
ＢＩＯＳ Ｓｅｔｔｉｎｇ
