18
User Manual
Once you have inserted the part of the
cover to be trimmed into the slot
(e)
(between the welding bar and the work
surface of the unit)
and you have confirmed
the correct alignment
,
carry out a first trim
(on the long side)
and
start the welding
cycle by pressing the cycle start push-
button (
f
) or pedal (
g
).
The LCD display will show the sequence of
the operation the machine is automatically
carrying out.
4.
Remove the book/cover from the welding
zone.
Do not pull the book/cover towards
you, but remove them from the
welding zone by sliding the fingers
from the inner side to the outer side,
in order to properly detach the cover.
This allows you to obtain a clean
separation of the cover from the
welding bar and avoids plastic gloss
appearing on the welding of the
cover.
Gently fold the front cover of the book
(f)
and insert it into the left pocket
(g)
of the
cover
(already trimmed to the required
length).
h
i
e
f
g
Summary of Contents for e-DaVinci
Page 1: ...User Manual...
Page 2: ......
