User Manual
9
3 How to Use the Unit
3.1 Power On and Off
To power on the unit simply turn the
main switch
(1)
on the back of the
welding head to the “I”
(ON)
position;
the display will light after a few seconds.
After the power on, the display
(a)
will
show the following welcome icons:
The warm up icons, followed by the manual operation icons (as shown on the following page) will
then be displayed in sequence.
To switch off the unit, turn the main switch
(1)
to the “O” (OFF) position. The display
(a)
will turn-off
to indicate that the unit is no more powered.
In case of an emergency and/or to put the unit out of order, disconnect the power
plug from the wall-socket, to completely isolate the unit from the power supply
.
1
a
Summary of Contents for e-DaVinci
Page 1: ...User Manual...
Page 2: ......
