![Colibri e-DaVinci User Manual Download Page 11](http://html1.mh-extra.com/html/colibri/e-davinci/e-davinci_user-manual_2637136011.webp)
User Manual
5
2 Installation and Connection
To correctly install and connect the
Co
Librì
e-DaVinci
book covering machine, it is necessary to
perform the operations referred to below
(in the order indicated)
, working as set out in this chapter:
9
Choosing the installation site
9
Unpacking and checking the components
9
Preparing and positioning the unit
9
Connecting the cycle start pedal cable
9
Connecting the power cable
2.1 Choosing the Installation Site
To ensure the best operation of the unit, the installation site must have the following characteristics:
♦
The support surface must be sturdy and perfectly
level, failing which the unit might not work properly.
Moreover, it must be easily accessible, not subject to
excessive vibrations
.
♦
Install the unit in a place that is not exposed to direct
sunlight or atmospheric agents.
♦
Leave sufficient space around the unit so that you
can work comfortably and position it far from other
electronic equipment, to avoid interferences.
♦
The installation site must have a temperature ranging
between 15 °C and 25 °
C (59 °F to 77 °F)
and
relative humidity
(RH)
between 20% and 80%. The
unit might not work properly at a temperature of less
than 15 °C
(59 °F)
.
♦
The installation site must be adequately ventilated,
free from dust and/or condensation. Do not install the
unit near a humidifier.
♦
To prevent damage to the unit do not install it in a
place where it will get splashed by water.
♦
To avoid sudden temperature changes do not install
the unit near air conditioners, heaters or other heat
sources.
♦
The unit must be installed near a wall socket. This
one has to be easily accessible in order to allow a
prompt disconnection of the plug, in case of emergency.
Summary of Contents for e-DaVinci
Page 1: ...User Manual...
Page 2: ......