![background image](http://html.mh-extra.com/html/cointra/cosmos/cosmos_instructions-for-installation-and-use-manual_2635019073.webp)
73
A73023080
EN
Choose the location of the thermal emitter following the minimum distances indicated below:
Note: If the window sill protrudes less than 20 mm, the gap above the emitter can be disregarded.
3. ELECTRICAL CONNECTION
The thermal emitter must be connected to the power line (230 V ~ 50 Hz) via its plug. The following
warnings must also be taken into account:
-
The device must not be placed below an electrical outlet or switch.
-
The power line must be protected with a high-sensitivity differential device.
4. MOUNTING
The thermal emitter must be held by its handles, as shown in the following image: