![background image](http://html.mh-extra.com/html/cointra/cosmos/cosmos_instructions-for-installation-and-use-manual_2635019072.webp)
72
EN
A73023080
WIFI SMART FLUID ELECTRIC THERMAL EMITTER
1. PRESENTATION
Dear customer
Thank you for choosing COSMOS wifi electric thermal emitters, with their sophisticated design,
state-of-the-art electronics and high reliability (TRIAC), smart control for maximum efficiency and
high build quality. They comply with the Ecodesign Directive and are designed and made in Spain.
The COSMOS thermal emitters of COINTRA, as well as all their materials and components, have
undergone rigorous quality control tests.
Before switching the emitter on, you must carefully read these instructions which will help you
to ensure correct operation of the device with maximum performance and complete satisfaction.
Keep them close by in case of any doubts.
2. LOCATION
The ideal place to locate the emitter is as close as possible to the coldest wall in the room.
It is not recommended to install the emitter on external walls without any insulation, however, in
this case, the section of wall behind the thermal emitter must be insulated.
In bathrooms, the electric thermal emitter must be installed outside the protective area, according
to the regulations in force (zone 3 in the picture).
Classification of the bathroom zones
Under no circumstances may the thermal emitter be located under an electrical outlet.