90
EN
A73023080
It starts at the Type of Meter to reset, showing the DAILY, but you can also select any of the other
three available WEEKLY / MONTHLY / TOTAL.
If the
OK
key is touched while the Type of Meter to Reset is selected, you can choose with
p
and
q
which one you want to reset. To confirm that it is correct, you must touch
OK
again.
- If the
OK
key is touched while the OK option is selected, it will reset the selected type of
meter, as well as the meters with a period less than the selected one.
When the meter or meters are reset, all their energy consumption values
will be “reset to 0”:
Registered Period
: 0 days / 0 hours
Consumed Energy
: 0 kWh
Estimated Cost
:
0 €
“DONE” will appear on the screen, confirming the meter reset.
- Touching the
OK
key with CANCEL selected, will return to the Energy menu.
In this Reset menu, touching the
Mode
key will automatically return to the Energy menu. If no key
is touched for 30 seconds, the emitter will return to the last operating mode.
5.4.6 CONFIGURATION Menu
Configuration menu allows the user to set parameters and func
-
tions for the other modes.
There are 9 menus in Configuration menu which can be se
-
lected by
q
and
p
keys, and touching the
OK
key when the
desired menu is highlighted
.
When finished, the
Mode
key can be touched to return to the previous mode
.
When no keys are
touched for 30 seconds, the emitter will return to the previous operation mode.
5.4.6.1 Brightness level at rest
This menu sets the level of brightness that the emitter will show when it is at rest; this is the bright-
ness level of the screen kept after the time selected in menu 2.
There are 4 levels to choose from:
0:
Off
2:
65 % brightness
1:
25 % brightness
3:
100 % brightness
(this is the level when any key is touched)
The level can be adjusted using the
p
and
q
keys and confirmed with the
OK
key; the emitter will
then return to the Configuration screen.
