background image

 

 

 

Copyright © 2006, Cognitive - 1.800.525.2785 

91 

1 0 5 - 1 6 9 - 0 3  

 

Chapter 9: Printer Specifications 

Specifications are provided for reference and are based on printer tests using 
Cognitive brand ribbons and labels. Results may vary in actual application settings 

or when using products other than recommended Cognitive supplies. Cognitive 

recommends always qualifying any application with thorough testing. For updated 
C Series technical specifications please visit us online at: 

http://www.compactindustrial.com/cseries/techspecs/techspechs.html

  

C Series Technical Specification Information: 

Standard Features 

 

Compact Industrial™ printer design, small footprint high performance 

 

Administrator Configuration Software 

 

Bi-directional USB Drivers 

 

LCD control panel: Back-lit, 2 line, 16 characters (Cxi only) 

 

200 MIPS, 180MHz, 32 bit RISC Processor 

 

16 MB SDRAM memory  

 

8 MB flash memory for firmware and stored objects. 

 

Hinged media cover to accommodate oversized rolls 

 

Double clamshell design for easy access user setup menus, easy ribbon loading 

and simple media loading. 

 

Rugged die-cast metal user interface. 

 

Audible indicator for error warning or document alert. 

 

Wide path indexing sensor range. 

 

203 dpi print resolution (8 dots/mm) 

 

2” and 4” Print width models 

 

Upgradeable firmware and stored objects 

 

Direct thermal printing

Chapter 

Summary of Contents for C/Rx







































































































































Reviews: