CognitiveTPG C/Rx User Manual Download Page 18

Page: 18 / 134

1 0 5 - 1 6 9 - 0 3

LEFT button (B):

Press the LEFT button to display the current printer status.

From within the menu, pressing the LEFT button returns to the previous menu

level.

UP (A) and DOWN (C) buttons:

Allows menu navigation up and down through

the menu tree, and allows the user to increase or decrease numeric values in some

menu items.

RIGHT button (D):

Allows the user to enter the menu system, and controls

horizontal movement of the menu cursor for certain menu items.

ENTER button (E):

In the menu mode, selects a menu item for further navigation.

ENTER also selects a value in a menu item. The LCD displays the confirmation
message

VALUE HAS BEEN SET

At the highest menu level, when

COGNITIVE

is displayed on the LCD, or when

the printer is ready to print, this button acts as a FORM FEED.
When the ENTER button is pressed, a single label is fed if the printer is in an
indexing mode. When the button is pressed continuously for longer than two

seconds, the printer feeds labels until the button is released. When indexing is

disabled, the printer feeds media continuously when the ENTER button is pressed.

Summary of Contents for C/Rx

































































































































Search results

Summary of Contents for C/Rx

Reviews:

Related manuals for C/Rx

Brands by name

Popular brands

CognitiveTPG C/Rx, User Manual

Search results

Summary of Contents for C/Rx

Reviews:

Related manuals for C/Rx

Brands by name

Popular brands