background image

 

 

 

Copyright © 2006, Cognitive - 1.800.525.2785 

97 

1 0 5 - 1 6 9 - 0 3  

 

Physical Specifications 

Characteristic 

2” Ci or Cxi 
Printer 

4” Ci or Cxi 
Printer 

Height 

7.1” (181mm)  7.1” (181mm) 

Width 5” 

(127mm) 

6.9” 

(175mm) 

Depth 10.04” 

(255mm) 

10.04” 

(255mm) 

DT Weight 

5.02 lbs (Cxi) 

4.91 lbs (Ci) 

5.91 lbs (Cxi) 

5.88 lbs (Ci) 

TT Weight 

5.23 lbs (Cxi) 

5.00 lbs (Ci) 

6.10 lbs (Cxi) 

6.00 lbs (Ci) 

 

Software 

C Series Administrator:

 Printer with USB/Serial bi-directional 

configuration software, included with printer requires Windows driver 
installation.  

C Clean Driver Utility:

 Self contained driver cleanup utility that entirely 

removes old drivers. 

Windows™ OS Drivers:

 Printer drivers that allow applications running on 

Windows operating systems to print to Cognitive printers. 

 

Preventive Maintenance 

Cognitive recommends cleaning the printer on a regular basis using standard 
Cognitive cleaning supplies.  

Cleaning 

The exterior is cleaned with a lint-free cloth, and if necessary, a mild 

detergent solution in a damp cloth. It is recommended that interior 
components are cleaned with the authorized cleaning supplies listed below 

every 20,000 inches (508 m) or blown air to remove any particles. The 

printhead should be cleaned every 5000 inches if preprinted labels are used. 
The platen should be cleaned at the same interval, using the same cleaning 

materials as applied to the printhead. Please refer to Chapter 11 for more 
details on cleaning supplies. 

Summary of Contents for C/Rx







































































































































Reviews: