Cognex MVS-8000 Series, Hardware Manual

Page: 72 / 86

MVS-8600 Hardware 2
72 MVS-8600 Hardware Manual
J3 All Su12 V power for cameras at up to 1.0 A drawn from
the MVS-8600.
J4 All Connect a wire to chassis ground.
J5 2 Connect encoder channels A and B for TTL encoders
associated with line scan cameras on both camera ports.
J6 1, 2 TTL wiring point to connect trigger input and strobe output for
both camera ports. Use either this TTL jack or the
opto-isolated jacks J8 -J10 for triggers and strobes, but not
both.
J7 1, 3 Connect encoder channels A and B for an LVDS encoder
associated with a line scan camera on camera port 0.
J8 1, 2 Opto-isolated wiring point to connect trigger input and strobe
output for camera port 0. Use either this opto-isolated jack or
the TTL jack J6 for trigger and strobe, but not both.
J9 3 Connect encoder channels A and B for an LVDS encoder
associated with a line scan camera on camera port 1.
J10 1, 2 Opto-isolated wiring point to connect trigger input and strobe
output for camera port 1. Use either this opto-isolated jack or
the TTL jack J6 for trigger and strobe, but not both.
J11 All Ground terminals for TTL ground and power ground.
Jack
I/O Config
Option
Connection
Table 24. Connection jacks of the I/O connection module