2
MVS-8600 Hardware
MVS-8600 Hardware Manual
75
The collector (+) pin for each line has a pull-up resistor to the TAP24V_
n-n
common rail
for each group of four lines, which must be connected to the desired operational voltage
between 5 and 24 V. Supply a source of 5 to 24 volt power to the appropriate
TAP24V_
n-n
line. Use TAP24V_0-3 on P4 to supply output lines 0 through 3; use
TAP24V_4-7 on P6 to supply output lines 4 through 7.
Connect the emitter (–) pin for each line to the ground terminal of the external voltage
source.
Table 26 shows the pin numbers of the programmable output line pairs.
P4
P4’s 300-0240
P6
P6’s 300-0240
Signal Name
Pin
Pin on DB-25
Pin
Pin on DB-25
Notes
OPTO_OUT_0–
6
16
These
lines not
available
with I/O
option 3
OPT
4
15
OPTO_OUT_1–
3
2
OPT
1
1
OPTO_OUT_2–
19
10
OPT
17
9
OPTO_OUT_3–
20
23
OPT
18
22
OPTO_OUT_4–
6
16
OPT
4
15
OPTO_OUT_5–
3
2
OPT
1
1
OPTO_OUT_6–
19
10
OPT
17
9
OPTO_OUT_7–
20
23
OPT
18
22
TAP24V_0-3
2
14
TAP24V_4-7
2
14
Table 26. Pin numbers of opto-isolated output lines
Summary of Contents for MVS-8000 Series
