Cognex MVS-8000 Series, Hardware Manual

Page: 71 / 86

2 MVS-8600 Hardware
MVS-8600 Hardware Manual 71
Wiring Devices to the I/O Connection Module
Figure 24 shows the layout of the top panel of the I/O connection module, and illustrates
the terminal labels. The signal name abbreviations are explained in Table 18 on
page 61.
Figure 24. Wiring connections on I/O Connection Module
The connection jacks of the I/O connection module each contain four screw terminals
that accept the connection of bare wires from devices. The use of each jack is explained
in Table 24. The second column refers to the software I/O configuration options and
associated PIO cables, as described in Table 23 on page 70.
ENCODERS
TTL I/O LVDS 0 LVDS 1
TTL 0 TTL 1 OPTO 0 OPTO 1
STROBES / TRIGGERS
GND CHASSIS GND
COGNEX
J3
J2 J6
J5 J8
J7 J10
J9
J1
J11
J4
+12V POWER OUTPUT
+5V POWER OUTPUT
STRB/TRIG0 STRB/TRIG1
A/B 0 A/B 1
STROBE 0 TRIGGER 0
A/B 0
STROBE 1 TRIGGER 1
A/B 1
+12v S0 T0 S1 T1 S0+ S0- TO+ T0- S1+ S1- T1+ T1-
A0 B0 A1 B1 A0+ A0- BO+ B0- A1+ A1- B1+ B1-
+5v
Camera
Power
Frame
Grabber
Hirose
Cable, see Table 23
Jack
I/O Config
Option
Connection
J1 All DB-25 jack accepts one of the PIO cables listed in Table 23
on page 70.
J2 All Su5 V power for cameras at up to 1.0 A drawn from
the MVS-8600.
Table 24. Connection jacks of the I/O connection module