Cognex Checker 3G Series, User Manual

Page: 22 / 25

42 43
x5
2
3
1
3
4
1 2
Changing Lenses
To remove the Checker lens, follow the
steps listed below
Note: Failure to follow these
instructions can cause damage to your
Checker
1 Unscrew lens cover Lens
is secured to lens cover by
small internal O-ring
2 When lens is fully released,
remove cover with lens in
place
3 Remove lens from lens cover
Take care not to lose O-ring
that secures lens to lens
cover
To install the Checker lens, follow the
steps listed below
Note: Failure to follow these
instructions can cause damage to your
Checker
1 Screw lens into Checker at
least five full rotations.
2 Make sure both outer and
inner O-rings are seated in
place on the lens cover
3 Firmly and evenly press the
lens cover onto Checker
until it snaps into place
4 Screw in the lens cover to
bring Checker into focus