Addressable Control Panel for CO and NO
2
ZafirCO
FIRE PROTECTION MANUFACTURER
Ctra. de Molins de Rei a Rubí, Km. 8,4 - 08191 RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 - Fax:+34 936 999 261 - [email protected] - www.cofem.com
44
Hereafter are described different options:
10.1 Monitoring
Option 1 of menu 1. Allows to display information of the concentration sent by the sentor to
control panel.
L A B E L
T y p e : S C O
C : 0 3
Z n : 0 1
P t : 0 0 2 S t : R E P O S E
P n : 5 5 8 2 6
V a l u e s :
[
0 1 0
0 1 2
0 1 2
0 1 1
]
A v e r a g e : 0 1 5
-
LABEL:
Name or reference associated to sensor within the facility for easily identify. By
default, it is the value of the control panel, zone and point (Ex: C: 01Zn02Pt04).
- Type:
Type of sensor.
- C: Zn: Pt:
Control panel, Zone and Point.
- St:
sensor Status: Repose or Alarm.
- Pn:
Program number of the sensor.
- Values:
Values of the last four instantaneous concentration sent by the sensor. This value is
sent each 10 s approximately to control panel, and it is used for the actuation of the alarm relay
and display on the screen when in alarm status.
- Average:
Value of the last average concentration sent by the sensor. This value is sent each
50 s approximately to control panel, and it is used for the actuation of ventilation relays and
display on the screen if the zone is not in alarm status.
10.2 History
Otion 2 of menu 1. This menu shows the information of events produced on the control panel.
These events may be alarms (ventilation, CO, NO2), activation or deactivation of ventilations,
faults, zones in test, keys activation (like silence alarms, no delay, panel on test mode or
manual ventilation) and user access to level 3. The events are listed in chronological order,
where the last is the newest. The system can store up to 4020 events. When the 4095 events
are exceeded, the control panel eliminates all the events and starts filling them again. Through
the top and bottom cursors we move through the different stored events.
N U M : 0 1 5 6 5
A L A R M
C O
C . P A N E : 0 1
Z O N E : 0 3
P / N U M B : 3 2 3 0 7
P O I N T : 0 0 3
0 2 / 1 1
1 9
1 2 : 3 5
L A B E L :
D E T E C T O R
0 3
-
NUM:
Number of the event on the list, where event number 1 is the oldest. Followed by the
type event.
- C.PANE:
Number of the control panel.
- ZONE:
Zone that the event ocurred.
- P/NUMBR:
In the case that the event has ocurred on a detector, here shows its programming
number.
- POINT:
In the case that the event has ocurred on a detector, here shows the number of point
in the Zone. Followed by date and time of ocurred event.
-
LABEL:
The label of detector.
