21
Blinking yellow led indicating that the control panel is on essay mode
(see page_)
Blinking red led indicating fault in zone line or relay line (open line or
crossed line)
Blinking red led indicating a power supply fault. The display will show if
it’s a power supply fault, a fault of the 30V exit or a central battery fault.
Yellow led indicating that the system doesn’t work properly
Red led indicating that a detector has been activated or that a call point has
been activated.
Blinking red led indicating that a relay has been activated by the control
panel
Green led indicating that the control panel is getting communication with
an extern equipment such as a PC or a repeater.
3.1.3.- Display
Alphanumerical backlight LCD with 2 lines (16 characters each line).
3.2.- Functioning: access levels
The control panel has four access levels:
The first level (level 1 ) allows the more basic manipulations of the control panel, as well as stop buzzer or
checking the event history detected by the control panel.
The level 2 is only accessible by the maintenance staff, with an entry code. In this level the authorised people can
do functions that affect the control panel auto-evaluation, with a test, like the activation of the different elements of
the installation (sirens, manoeuvres, extinction and evacuation).
The level number 3 is only designated for use exclusive professional personnel by an access code, because in this
level we can change the system configuration.
The fourth level (Level 4) allows the access to the control panel inside with a key.
TEST
SYSTEM FAULT
SUPPLY FAULT
CPU FAULT
FIRE
RELAYS ON
COM T x D
L O N D O N
C O F E M
8 Z o n a s
4 R e l e s
