33
•
Detector day/night mode delay:
•
Call point active Day/Night Mode:
With this arrow we can change ro active at day mode or night mode to be active the delay or not
according standard EN54 part 2. Press ENTER to confirm selection.
ENTER
+
=
Nº relay: 1
Nº relay: 1
Day Point Del NO
Day Call Point YES
ENTER
+
=
Nº relay: 1
Day Call Point YES
•
General Activation:
But if, in spite of the general activation, what we wan is to activate the relays (that we are now configuring) with
one of the different zones, what we have to do is to make 4 programming lists. In this case, it is not necessary to
complete them all, but only the necessaries. So if we want to activate the relay number 1 with the zone number 1,
we will do as follows:
3.2.3.5.- Control Panel Menu Working Mode
To go to this part of the menu, we have to make the next steps: MENU/SYSTEM/4.Menu Mode..
Using this menu we can go to the next features: Functioning mode, watch, Initial text, Essay mode, Printer and
Retarded siren, Language, control panel RS and COM RS.
3.2.3.5.1.- Day/Night mode
With this arrow we can change ro active at day mode or night mode to be active the delay or not
according standard EN54 part 2. Press ENTER to confirm selection.
ENTER
+
=
Nº relay: 1
Nº relay: 1
Day Det Delay NO
Day Det Act YES
ENTER
+
=
Nº relay: 1
Day Det Act YES
With this arrow we can change to YES or No the General Activation
ENTER
+
Nº relay: 1
Act General YES
ENTER
+
=
Nº relay: 1
Act General YES
ENTER
+
=
Nº relay: 1
Nº relay: 1
ENTER
+
=
Nº relay: 1
List1: 0 0
List1: 1
List1: 0
With this arrow we can change to day or night mode.
Please confirm it by pressing ENTER
ENTER
+
SYSTEM
4.Menu Mode
ENTER
+
=
MODE
1.Day/Night
