12
General Siren
Monitored output siren with delay possibility. Menu indications to configure delay:
MENU/5.System/4-.Menu Mode/6-.Del. Siren.
Siren installation will be done following enclosed outline in installation part of this manual.
Always that an alarm happens and after programmed delay, general siren will be activated.
General Fault
Non-monitored output composed by a commuted volt-free relay.
General Alarm
Non-monitored output composed by a commuted volt-free relay.
It will be activated always when a system alarm happens.
2.2.5.- Auxiliary Inputs.
•
Control Panel External Reset
Input located in power supply card .
To do a reset in control panel it is necessary to bridge the common with reset input during few seconds.
That bridge reset input and common has to be provided by a lock mechanism (p.e: a key) in order to be done
only by an authorized person.
2.3.- Components.
2.3.1.- Battery.
Number of zones and relays will determine the necessary type of batteries to be connected to the control panel.
12 V two battery connection serial:
12V
12V
-
+
-
+
-
