Digital fire detection control panel
COMPACT LYON PLUS
88
FIRE PROTECTION MANUFACTURER
C / Compositor Wagner, 8 –P.I. Can Jardí 08191 - RUBÍ (Barcelona) ESPAÑA.
Tlf.: +34 935 862 690 –
Annex 2: Elements configuration Lyon / C-Lyon / Zafir
1. Introduction
The steps necessary to configure the Addressable Control Panel LYON are given below.
The addressable system includes the following elements:
Addressable sensors
Optical sensor
A30XHAS A50S / I
Heat sensor
A30XTA A50H / I
Optical and Heat sensor
A30XHA
A50SH / I
Multi-sensor
A30XHTCO A50HSCO
Addressable key
PUCAY
Master module
KMAY
Relay modules
1 relay
MDA1Y
2 relay
MDA2Y
Technical signals module
MSTAY / MSTAY8
Relay and Technical signal module
MYOA / F
Loop isolator base
KABY
Addressable siren
SIRAY / SIRAYL / SIRAY+BSLC
Each of these elements has a programming label. This number is assigned at the factory.
When an element search operation is conducted using the control unit, it finds all the loop elements, storing
the type of element and the assigned programming number.
The basic purpose of this procedure is that, by conducting this search, all these numbers can be passed to the
control unit memory and for them to be assigned to the loop where the search was conducted.
NOTE: Before assigning a point, it is highly advisable to obtain the programming lists with all the data.
