Coemar REFLECTION LEDko EXT, User Manual

Page: 5 / 32

5
Congratulations on having purchased a Coemar product. You have assured yourself of a fixture
of the highest quality, both in componentry and in the technology used. We renew our invitation
to you to complete the service information on the previous page, to expedite any request for
service information or spares (in case of problems encountered either during, or subsequent
to, installation). This information will assist in providing prompt and accurate advice from your
Coemar service centre. Following the instructions and procedures outlined in this manual will
ensure the maximum efficiency of this product for years to come.
1.
Packaging and transportation
1.1
Packaging
Open the packaging and make sure that no part of the equipment has suffered any damage
during the transportation. In case of damage to the fixture, contact your currier and your supplier
immediately by telephone, fax or email, and inform them you will formally notify them in writing
through registered letter.
Packing list
Ensure the packaging contains:
1 LEDko EXT
1 Instruction manual
2
. General information
2.1
Safety informations
Fire prevention:
1.
Never locate the fixture on any flammable surface.
2.
Minimum distance from flammable materials: 0,5 m.
3.
Minimum distance from the closet illuminable surface: 0,5 m.
4.
Replace any blown or damaged fuse only with those of identical values. Refer
to the schematic diagram if there is any doubt.
5.
Connect the projector to mains power protected by a thermal magnetic cir-
cuit breaker.
Prevention from electric shock:
1.
Presence of high voltage inside of the fixture. Insulate the projector from mains
supply before opening or performing any function which involves touching
the inside of the fixture, including lamp replacement.
2.
For the connection to the mains, adhere strictly to the guidelines outlined in
this manual.
1.2
Transportation
The
LEDko EXT
should be transported in either its original packaging or in an appropriate flight
case.