23
FAn
[Fan Speed]
AUtO
[
Auto
]
LO
[
Low noise
]
dISP
[Display]
611 - 19000
Fan Speed:
• Auto:
under this setting the fan speed
varies based on the overall tempera-
ture of the fixture to guarantee the
maximum output possible;
• Low noise:
this setting will keep the
speed of the fan at the minimum level
while the light output will decrease in
case of overheat.
DMX channels:
Shows the DMX mode and number of
channels selectable;
Display functions:
Changes the display settings:
• Reverse:
rotates the display of 180°;
• Auto:
Sets or disables the automatic
display turn off function, which would
occur after 10 seconds of inactivity;
• Hold
Sets or disables the automatic
display lock function that occurs after
10 seconds of inactivity;
Note:
The AUTO and HOLD function be-
come active only when the DMX address
selection is displayed (A001). The effect
of AUTO and HOLD trigger after 10 sec-
onds of keyboard inactivity. To turn on
the display it is enough to push a button,
to unlock the keyboard it is necessary to
hold any button down for a few seconds.
LED Frequency:
Allows to choose the operating frequen-
cy of the LEDs in order to avoid flickering
issues with video recording devices. The
excursion varies from 611 Hz (default) to
19000 Hz.
Default Settings:
It restores all the settings to default val-
ue except for led settings, hour and DMX
address.
Measures:
Allows to read all the parameters: LED
and board temperatures, fan level, DMX
ratio, DMX, alarms, channels value and
software version.
dMX
[DMX channels]
FrE
[LED Frequency]
8 CH
[
5 Channels
]
4 CH
[
1 Channel
]
rurS
[Reverse]
HOLd
[On - Off]
AUtO
[On - Off]
dF.SE.
[Default Settings]
MEAS.
[Measures]
Summary of Contents for REFLECTION LEDko EXT
Page 1: ...EXT with dual gobo rotator ...
Page 30: ...30 User notes ...
