13
4.7
How to insert the glass gobos
To insert one or two (glass or metal) gobo, follow the 4.5 paragraph to remove the dual gobo ro-
tator; then screw off the metal rings “
K
” that will keep the gobo steady with the provided key “
L
”,
follow the same steps if you want to mount a second gobo on the back. Once removed one or
both the rings, place your gobo “
M
” at will. Done this, proceed with the re-closing the dual gobo
rotator. Then place the rings in the appropriate slot and re-tighten until the gobo is well fixed.
At this point reinsert the dual gobo rotator keeping it slightly inclined “
N
” so that it can enter in
the optical group and fix it in the slot. Finally reconnect the plug that goes from the motors of
the dual gobo rotator to the body of the
LEDko EXT
. At this point following the DMX chart you
should be able to move your gobo at your convenience.
K
L
M
N
Summary of Contents for REFLECTION LEDko EXT
Page 1: ...EXT with dual gobo rotator ...
Page 30: ...30 User notes ...
