15
Warning!!
The use of a thermal/magnetic circuit breaker is recommended. Strict adherence to regula-
tory norms is strongly recommended.
LEDko EXT
should not be powered through a dimmer as this may damage the internal
switching power supply.
Prior to connecting the device to mains power, ensure that the mains characteristics are
within the recommended range for the use of
LEDko EXT
.
All cabling and connections should be carried out by a suitably qualified personnel.
Warning!
Make sure that screening and conductors are not in contact one another or with the
metal housing of the connector.
Pin#1 and housing never must be connected to the power supply unit.
6.1
Control signal connection by XLR5 plugs
The digital control signal is transmitted to the projector via a two pole cable screened as per
International standards for the transmission of DMX 512 data. The connection must be serial,
using connectors XLR5 male and female located on the back of
LEDko EXT
labelled DMX512 IN
e OUT (see diagram).
Connectors equipped on
LEDko EXT
are IP rated, which ensures protection against water and
dust. In order to keep this rating they must be connected exclusively to other IP rated connec
-
tors.
6
. Control signal connections
DMX IN
DMX OUT
Summary of Contents for REFLECTION LEDko EXT
Page 1: ...EXT with dual gobo rotator ...
Page 30: ...30 User notes ...
