cable preparation
The mains cable provided is thermally resistant, complying to the most recent international standards, approved by VDE and confor-
med to these following legislations: IEC 331, IEC 332 3C,CEI 20 35.
NOTA
: In case of cable replacement, similar cable with comparable thermal resistant qualities must be used exclusively
(cable3x1,5, external ø 10 mm, rated 300/500V, tested to 2KV, operating temperature -40° +180°,
coemar
cod. CV5309).
mains connection
ProWash 575 LX
can opearte at 115V-208V-230V-240V at 50 or 60Hz (the desired tension and frequency must be selec-
ted as described in paragraph 5 of this manual).
Prior to powering up the fixture, make sure the model you own matches the requirements of your mains supply
For connection purposes, ensure your plug is of a suitable rating:
at 230V, 8 amps
at 115 V.11Amps
Locate the mains cable which exits the base of the unit and connect as shown below:
protection
The use of a thermal magnetic circuit breaker is recommended for each
ProWash 575 LX
.
A good earth connection is essential for the correct operation of the fixture. Strict adherence to regulatory norms is strongly
recommended.
massa/ground
neutro/neutral
fase/live
marrone - brown
blu - blue
giallo/verde - yellow/green
alimentazione
main
7. Mains connection
9
English
