The fixture can operate at 115-208, 230 or 240V .at 50 or 60 Hz;
coemar
usually selects (unless specific request is made),
tension at 230 V and frequency at 50 Hz. The selected voltage and frequency are barred on the print on the base of the fix-
ture, as shown in the picture below.
If this preset does not correspond with the conditions in your particular country of operation, follow the instructions in the
appropriate section of this manual:
16. Altering the operating voltage and frequency.
Incorrect frequency and voltage selection will detrimentally affect the operation of the projector.
100V
115V
208V
230V
240V
50Hz
60Hz
factory set
main at:
5. Operating voltage and frequency
7
English
