mounting
ProWash 575 LX
comes with four rubber feet mounted on the base, allowing it to stand on any kind of surface. It can be
installed both on the ground and upside down, hanging from the ceiling.
In case of suspended installation, we recommend the use of a proper structure, able to stand the weight of the unit.
Said structure, besides being sufficiently robust, must also not be affected by the slight oscillating movement provoked by
ProWash 575 LX
while operating; provide therefore to make your trussing rigid enough.
The 2 mounting holes Ø13 mm (
A
) on the base of thei
ProWash 575 LX
allow the projector to be mounted by means of
c-shaped clamps.
safety chains
The use of a safety chain fixed to the
ProWash 575 LX
and to the primary suspension structure is highly recommended to
protect against the accidental failure, however unlikely, of the primary suspension point.
If using an aftermarket safety chain not manufactured by
coemar
, ensure that it is of a sufficient rating to hold the weight of
the unit.
The safety chain is attached by means of the two holes
B
located in the base of the unit as shown in the diagram.
movement
The projector has an articulated movement of 530° in the base and 284° through its yoke;
DO NOT
obstruct the articula-
ted movement in any way.
protection against liquids
The projector contains electric and electronic components that must not come into contact with water, oil, or any liquid.
risk of fire
Each fixture produces heat and must be installed in a well-ventilated position. The minimum recommended distance from
flammable material is: 0.5m. Minimum distance from the object being illuminated is: 2m.
forced ventilation
You will note that the projector’s housing contains several air entry points and fan outlets, positioned both on the head and
the base of the unit; under no circumstances should any of these points be obstructed!
Questo comporterebbe il surriscaldamento dell’apparecchio, con il rischio di comprometterne seriamente il funzionamento
Obstruction of any of these points will result in the over-heating of the unit, detrimentally and seriously affecting the proper
operation of the
ProWash 575 LX
.
ambient temperature
Do not install the fixture where there’s lack of a constant air flow; ambient temperature should never exceed 35°C.
485mm
19,10”
6. Installing the unit
8
English
