26
26
10
. Accessories and Spare parts
All the components of
LEDko EXT FullSpectrum
are available as spare parts from your
Coemar
dealer or Service. Accurate description of
the fixture, model number and type will
assist us in providing for your requirements in an efficient and effective manner.
11
. Maintenance
11.1
Firmware update
The firmware of
LEDko EXT FullSpectrum
can be updates through the RDM protocol
(ANSI E1.20). Contact
Coemar
assistance to receive the software and the device updater.
11.2
Periodic cleaning
Lenses
Even a thin layer of dust can reduce the luminous output and alter the consistency of the
beam. Regularly clean all filters and lenses using a soft cotton cloth, dampened with a
special lens cleaning solution.
Cleaning of the unit
Use a soft brush or a common vacuum cleaner or a source of compressed air for removing
dust. For the cleaning of the housing use a soft cloth and a non-aggressive cleaner. Check
that the internal fans and heat exchanger must be perfectly clean.
11.3
Periodic controls
Mechanical components
Check the correct working of the mechanical parts and, if needed, replace them. Make
sure the projector is not mechanically damaged. If necessary, replace the worn parts.
Electrical components
Check all electrical connections, in particular for correct grounding and correct attachment
of all extractable connectors. Press the connectors if necessary and reposition as before.
11.4
Fuses
LEDko EXT FullSpectrum
has an automatic fuse that in most cases does not need to be
replaced.
Accessory name
Code
Small yoke
357LAM_036
Side handle
MA05
