9
English
WARNING !
Ensure that the structure the unit is hanging from as well as the fixing parts (bolts and nuts, clamps etc.) are suitable for
holding the weight of the unit.
The structure from which the unit is hung should be of sufficient rating to hold the weight of the unit, as should any clamps used to
hang the unit. The structure should also be sufficiently rigid so as not to move or shake whilst the projector moves during its opera-
tion.
Do not install the projector in locations where it is readily accessible by aunthorised or untrained personnel.
4.2 Safety connections
If the
Infinity Spot S
is fixed to a structure, the use of a safety chain is recommended in order to meet the relevant safety standards.
The safety chain should pass through the holes “E” located in the base of the fixture itself.
If using a safety chains or steel cables which have not been manufactured by Coemar, ensure that they are suitable for holding the
weight of the unit.
For ceiling mounted installations we suggest the use of appropriate clamps or fixings to attach the fixture to the mounting surface.
Clamps may be attached to the central hole provided in the cam-lock brackets, as shown in the following diagram.
5. Powering up
5.1 Mains cable characteristics
The mains cable provided is thermally resistant, complying to the most recent international standards. It meets or exceeds VDE and
IEC norms, IEC 331,IEC 332 3C,CEI 20 35.
NB: In case of cable replacement, similar cable with comparable thermal resistant qualities must be used exclusively (cable 3x1.5 ø
external 10 mm, rated 300/500V, tested to 2KV, operating temperature -40° +180°, Coemar cod. CV5309).
Connecting to mains power
For connection purposes, ensure your plug is of a suitable rating to sustain the maximum current:
•200/208/230/240 VAC 4.5 amps constant current in normal operation
Locate the mains cable which exits the base of the unit and connect as shown below:
