English
23
10.4 How to replace gobos:
1.
Lift and gently extract the support which contains the gobo you are going to replace from the gobos wheel.
2.
Remove the spring that fixes the gobo to the support.
3.
Insert the new gobo respecting the coated side. Locate the reference point on the gear and use it to orient the gobo and fix on to
the projector.
4.
Mount the spring.
5.
Mount the support on the wheel with the reference point looking outwards (see picture).
6.
Check the gobos freely rotate and mount the gobos assembly in the fixture following backwards the procedure explained in the pre
vious section.
