English
8. Display panel functions
The display panel of the
Infinity Spot S
shows all the functions available; it is possible to change some of those parameters and to
add some functions.
Changing the preset settings made by
Coemar
can vary the functions of the device so that it may respond in different ways depen-
ding on the controller, therefore carefully follow the instructions before carryng out any possible selection.
8.1 Quick guide to menu
In order to access to the functions, just push the menu button: a screen divided into four sections will appear; the sections will highli-
ght cyclically one by one every time a + or - button is pushed. To select the desired function, press enter.
The following diagram shows the content of every section.
MAIN FUNCTIONS
-
It groups the main setup functions of the fixture:
pan/tilt management, lamp management, fans
management, reset, test motors,ID code, back to
default settings and access to “SPECIAL MODE”.
DISPLAY SETUP
-
It allows the management of the display:
-brightness
-positive or negative graphic appearance
-backlight shutdown timer
-180° display rotation
MEASURES-
It allows the reading of all functional settings of
the fixture: temperature, DMX channels setting,
diagnostics, lamp’s odometer and version of the
installed software.
DEMO
-
It allows the performing of demonstration pro-
gram.
4 different demo programs are available.
8.2 Rapid scrolling
Via the
Infinity Spot S
display it is possible to rapidly scroll through the various numbers displayed in the menu in the following man-
ner:
1.
Pressing the + or - buttons will cause the number to scroll more quickly.
2.
Pressing and holding the + button and then the - button will cause the numbers to jump to the highest value.
3.
Pressing and holding the - button and then the + button will cause the numbers to jump to the lowest value.
14
no effect
0
- 10
0% -
4%
proportional movement of the gobo wheels through 360°
11 - 133
4% - 52%
proportional-stepmovement of the gobo wheels through 360°
134 - 255
53% - 100%
park, no function
0
- 10
0% -
4%
lamp off
11 - 29
4% - 11%
pan and tilt reset (once only)
30 - 65
12% - 25%
all motor reset exept dimmer, pan and tilt (once only)
66 - 100
26% - 39%
all motor reset exept dimmer (once only)
101 - 135
40% - 53%
reset of all the motors (once only)
136 - 170
53% - 67%
LCD display off
171 - 185
67% - 73%
LCD display on
186 - 199
73% - 78%
lamp on - standard focus
200 - 228
78% - 89%
lamp on - autofocus
229 - 255
90% - 100%
Edition: 1
lamp on/off and
motors reset
23
22
gobo effect selection
step
Date: 17/01/2009
Table name: DMX 512 functions
step
23
Tabella numero: 272
Projector:
InfinitySpot S
24
Note 8: the lamp on/off function can only be effected if an opposite level is set
Note 6: the display panel may be used to disable the switching off of the lamp via DMX
Note 7: turning off the lamp and all reset functions are delayed by 6 seconds to prevent accidental activation
