English
19
8.7 Special mode and electronic motor adjustment
WARNING !
This section is reserved for the exclusive use of qualified and experienced technical personnel.
“SPECIAL MODE” menu allows the access to the motor adjustment section and to special functions like lamp odometer reset, softwa-
re upload and download. To enter “SPECIAL MODE” reach the reset page in the “MAIN FUNCTIONS” menu, start reset choosing
“ALL” and press simultaneously enter and menu button for about 10 second nearly while the reset is being completed.
WARNING !
The electronic tuning procedure is only actuable with DMX512 signal present.
The display panel of the
Infinity Spot S
allows for the electronic alignment of the projector motors in the optical system. This proce-
dure is performed by
Coemar
at the factory. It may be useful to perform this procedure in order to obtain particular effects or in the
case of internal components being replaced.
Altering the factory settings may radically alter the functioning of the projector. Carefully read all of the following prior to attempting
any changes.
Note: pressing the b and - simoultaneously the setting returns to 128 (default).
SPECIAL MODE
MOTORS ADJUSTMENT
PAN
TILT
DIMMER
SHUTTER
IRIS
ZOOM
FOCUS
GOBO WHEEL 1
GOBO WHEEL 2
GOBO ROTATION
PRISM WHEEL
PRISM ROTATION
CYAN
MAGENTA
YELLOW
EXIT
SPECIAL FUNCTIONS
LAMP HOUR RESET
DOWNLOAD SW LCD
SURE ?
DOWNLOAD SW MOTORS
UPLOAD SW LCD
UPLOAD SW LCD
SURE ?
SURE ?
SURE ?
SURE ?
Pan movement alignment.
Tilt movement alignment.
Dimmer alignment.
Shutter alignment.
Iris alignment.
Zoom lens alignment.
Focus lens alignment.
Gobo 1 (rotating) wheel alignment.
Gobo 2 (fix) wheel alignment.
Wheel's 1 gobos alignment.
Prism wheel alignment.
Prisms alignment.
COLOUR WHEEL
Colour wheel alignment.
Cyan filter alignment.
Magenta filter alignment.
Yellow filter alignment.
It stores the settings and exits.
It restores to 0 the resettable lamp's electronic
odometer visible also in MEASURES menu. It must
be restored each time the lamp being changed in
order to get a correct reading of lamp's life.
.
It makes the fixture ready to transfer the LCD
software on to the PC.
It makes the fixture ready to transfer the MOTORS
software on to the PC.
It makes the fixture ready to receive the MOTORS
software from the PC.
It makes the fixture ready to receive the LCD
software from the PC.
