4) Insert the lamp into the lampholder (E).
The lamp used is manufactured from quartz glass and should be handled with care. Always adhere to the instructions supplied in
the lamp’s packaging. Do not touch the glass directly, handle the lamp through the protective film provided in the box.The GY 9,5
lampholder is asymmetrical in construction, with one pin larger than the other. Ensure that the pins are correctly aligned with the
appropriate socket. DO NOT USE UNDUE FORCE. Incase of difficulty, re-read the instructions and repeat the procedure.
5) Replace the lamp assembly into its original position and replace
and retighten the screws
The fixture may operate at voltages ranging from 100-115-208, 230 or 240V .at 50 or 60 Hz;
coemar
factory presets (barring spe-
cific requests), a voltage of 230v and a frequency of 50 Hz. This preset is indicated on the sticker located on the base of the projec-
tor, as indicated in the following diagram.
If the specified voltage and frequency do not match those of the country in which you are operating, follow the instructions in sec-
tion 17 of this manual. “Altering the operating voltage and frequency”
Incorrect voltage and frequency selection will detrimentally affect the operation of the projector and will
automatically void the warranty.
factory set
main at:
100V
115V
208V
230V
240V
50Hz
60Hz
5. Operating voltage and frequency
5
English