The electronic counter should be reset to zero hours every time the lamp is changed in order to provide accurate information about
lamp life
1) Turn off the projector.
2) Power up the
iCyc 250
whilst holding both the
+
and
–
buttons simultaneously.
The projector will have effected a reset of the
LIFE
lamp-life counter.
To verify that the counter reset has been undertaken:
1) Press the
menu
button, the projector will show
MODE
2) Press the
+
or
-
button until
MEAS
is displayed
3) Press the
enter
button
4) Press the
+
or
-
button until
HOUR
(for hour) is displayed.
5) Press the
enter
button
6) Press the
+
or
-
button until
LIFE
(lamp life) is displayed.
7) Press the
enter
button; the display will show
0000
confirming that the counter has been reset.
N.B. You may also verify that the other counters
LIFS
(cumulative lamp life for all lamps installed) and
UNIT
(number of hours of
fixture operation) have remained unaltered.
After having powered up the projector and have established DMX 512 control or have set it to operate automatically, the following
mechanical adjustments should be carried out in order to maximize the output of the projector in its current installation.
16.1 Adjusting tilt angle
Loosen the two adjustment bolts on the sides of the body which allow the body to tilt (+90° -45°).
16. Mechanical adjustments
A00 I
function display
menu
enter
+
15. Resetting the electronic counter
19
English