iCyc 250
may be controlled using the
DMX 512
control protocol. Connection should be as described in section
”8.2 Operation
via DMX 512”
.
If you have correctly followed all the steps described up to this point, your
DMX 512
controller will allow you complete control of
all the functions of the
iCyc 250
as described in the following table.
Turning on the lamp
Note that the table above indicates that to turn on the lamp channel number 7 of your
DMX 512
controller should be set to between
241 and 255.
You may force the lamp to turn on automatically on startup using the display panel, as described in section
11.2 “Display panel
functions”
in the text describing the
“Func”, lamp ON”
function.
channel
function
type of control
effect
decimal
1
dimmer
step
closed
0-7
proportional
from close to open
8-255
2
cyan
step
white clear
0-7
proportional
proportional cyan control from white to cyan
8-255
3
magenta
step
white clear
0-7
proportional
proportional magenta control from white to magenta
8-255
4
Yellow
step
white clear
0-7
proportional
proportional yellow control from white to yellow
8-255
5
Auto function
step
No effects
0-9
step
Auto program 1 (all colours, slow colour fade)
10-33
step
Auto program 2 (saturated colours, slow colour fade)
34-56
step
Auto program 3 (pastel colours, slow colour fade)
57-79
step
Auto program 4 (light colours, slow colour fade)
80-102
step
Auto program 5 (all colours, medium speed colour fade)
103-125
step
Auto program 6 (saturated colours, medium speed colour fade)
126-148
step
Auto program 7 (pastel colours,medium speed colour fade)
149-171
step
Auto program 8 (light colours, medium speed colour fade)
172-194
step
Auto program 9 (mixed colour sequence, colour fade at different speed
195-217
step
Random program
218-240
step
All programs
241-255
6
Lamp on/off/ reset
step
lamp off
0-10
step
Park (no function)
11-30
step
cmy and dimmer reset (only once)
31-45
step
cmy reset (only once)
46-60
step
Program stop
61-80
proportional
Selected auto-program pause time control (1 sec/8 min)
81-241
step
lamp on
242-255
note 2 :on/off lamp mode is not affected unless an opposite value is received
Display panel can inhibit lamp off function
note 1: Channel 6 has a delay time of 6 second to prevent accidental activation.
13. DMX 512 functions
17
English