manualshive.com logo in svg

Coemar iCyc 250, Instruction Manual, Page: 4 / 29

Share
Download
Coemar iCyc 250 Instruction Manual Download Page 4

4

English

iCyc 250 

utilises a Philips MSD 250W or Philips MSD 250W/2 lamp or equivalent.

The lamp is available from your authorised 

coemar

sales agent:

coemar code

105214/1

power

250 w

luminous flux

18.000 lm

colour temperature

8.500° K

base

GY 9,5

approximate lamp life

2000 hours

coemar code

105214

power

250 w

luminous flux

18.000 lm

colour temperature

6.700° K

base

GY 9,5

approximate lamp life

2000 hours

To access the lamp, you should proceed as described in sections 17 of this manual.

MSD are part of the mercury vapour family of discharge lamps and must be handled with great care. the lamp operates at high pres-
sure, and the slight risk of explosion of the lamp exists if operated over its recommended life.
We recommend, therefore, that the lamp be replaced within the manufacturer’s specified lamp life.

1) Locate the lamp assembly and, using a Philips head screwdriver, loosen the three screws (C) which affix the assembly.

2) Remove the lamp assembly (D).

3) Locate the lampholder (E)

4. Lamp: installation and replacement

Summary of Contents for iCyc 250






























Reviews:

No comments