19
If bottom line of the display reads ‘off’, the code is not activated. Press the ESC button to step back. Press the ENTER button
to type in the new code.
Using the 1-24 buttons, type in the new code. Your code can be a maximum of 6 characters. Press the ESC button to step
back. When the code is entered press the ENTER button.
Enter the new code again and press the ENTER button.
If the two entered codes are not the same, the controller will display a warning. You will need to repeat the procedure. Press
the ESC button and start again.
If the two codes match, the controller will then ask you to save your code. Pressing the ESC button exits without saving.
Pressing the ENTER button will save your lock code.
At this point, the lock code is activated (on) so from automatic mode you will be required to enter the menu lock code in
order to move into the menu system. The activated code can be inactivated by pressing the DELETE button.
