COE ORCHARD EQUIPMENT INC R Series, Owner'S Manual

Page: 13 / 48

O peration
10
Daily operation
FLUID LEVELS
PRIOR to starting CHECK all vital fluid levels. And FILL as necessary.

ENGINE OIL Pull indicator and check to make sure oil is in proper operating
range. Add High Quality Low Sulfur Motor Oil (15-40W ) as needed.

HYDRAULIC FLUID Check site glass for fluid level ( Fluid level will be indicat-
ed by a dark brown/black color ). If there is no fluid showing in site glass fill with a
Quality AW46 hydraulic oil TO CENTER OF SITE GAUGE.

RADIATOR COOLANT Check coolant level recovery tank daily. Fill with 50/50
mixture of water and coolant as needed. Tank has Cold & Hot indicators.

DIESEL FUEL Fill fuel reservoir at the end of each work day with a FILTERED
high quality OFF ROAD diesel fuel. DO NOT SMOKE WHILE REFUELING

SLING INJECTION SYSTEM Fill reservoir daily or more often if necessary with
filtered water and 1 1/2 to 2 quarts per tank COE SLING LUBE. Use 2 quarts of
COE SLING LUBE for 2 days after installing new slings or flaps. ( DO NOT USE
ANY TYPE OF SOAP IN LIEU OF COE SLING LUBE, EXCESSIVE BARKING
WILL OCCUR )
SHAKER BODY
PRIOR to starting PERFORM these simple procedures .

LUBRICATION Grease ALL points as per schedule and chart in the SERVICE
section of this manual USING only a high quality lubricating grease.

INSPECTION Visually inspect the shaker frame, components, tires, hoses and
connectors and all other items for cracks, wear, loose items, leaks and
malfunctions. Make necessary repair(s) before operating equipment.

CLEAN Keep machine body, interior and engine compartments clean of de-
bris, trash and leaking fluids. ( BUILD UP OF ITEMS CAN CAUSE FIRES )

AIR CLEANER Service air cleaner DAILY or MORE OFTEN in severe dust
conditions. Consult SERVICE section for proper air cleaner cleaning method.

COOLING SYSTEMS Clean engine radiator, oil cooler, AC condenser and in-
take screenS DAILY or MORE OFTEN in SEVERE debris environments.
( FAILURE TO CLEAN COOLING SYSTEM CAN CAUSE SEVERE DAMAGE)

SHAKER HEAD Check belt for proper tension and for wear. Inspect suspen-
sion for worn mounts or loose bolts. Check all pins and bolts. Inspect pads and
slings and flaps. Check & maintain energy pin bolt nut tension. ( REPLACE ITEMS
AS NECESSARY TO PREVENT HEAD & TREE DAMAGE )