Technical Manual
CODEL
66
8.7.2.
Write: Allows user to write data into memory location. The following are
the sub menus.
Write 0xXXXX to 0xXXXX (Write DATA to Memory)
Write 0xXXXX to 0xXXXX (Write DATA to
Memory).
Use
or
to scroll through to Write 0xXXXX to
0xXXXX.
8.7.2.1.
Write 0xXXXX to 0xXXXX: Allows user to enter data to memory
location.
Press
to access Write sub menu.
Use
or
to increment or decrement most
significant digit in hexadecimal.
Press
to move cursor to next most significant
digit. Repeat above procedure to increment or
decrement and finally press
to set data 0x01F8 in
memory location 0x7F80.
WRITE 0x01F6 to
0x7F80
WRITE 0x01F6 to
0x7F80
WRITE 0x01F6 to
0x7F80
WRITE 0x01F6 to
0x7F80
WRITE 0x01F6 to
0x7F80
WRITE 0x01F6 to
0x7F80
WRITE
0x01F6
to
0x7F80
WRITE
0x01F8
to
0x7F80
Summary of Contents for Tunnel Tech 700 Series
