Codec Tieline Gateway User Manual Download Page 266

Page: 266 / 306

266

Gateway and Gateway 4 Manual v1.2

© Tieline Research Pty. Ltd. 2021

Restoring Data from a Backup File

1. Insert a single partition FAT 32 formatted SD card with a backup .tgz file into the

SD CARD

SLOT

on the front of the codec.

2. Press the

SETTINGS

button.

3. Use the navigation buttons to select

Reset & Backup

and press the

button.

4. Select

Restore Settings

and press the

button.

5. Select the preferred restore option and press the

button.

6. Select the file to restore and press the

button.

7. A dialog confirms data has been restored successfully.

24.17

Configuring SNMP Settings

The codec supports Simple Network Management Protocol (SNMP) for managing devices on IP
networks. To configure SNMP settings:

1. Press the

SETTINGS

button.

2. Use the navigation buttons to select

IP Options

and press the

button.

3. Navigate to

SNMP

and press the

button.

4. Navigate to each setting in turn and press the

button to adjust and save each new setting.

Summary of Contents for Tieline Gateway



















































































































































































































































































































Search results

Summary of Contents for Tieline Gateway

Reviews:

Brands by name

Popular brands

Codec Tieline Gateway, User Manual

Search results

Summary of Contents for Tieline Gateway

Reviews:

Brands by name

Popular brands