Codec Tieline Gateway, User Manual

Page: 223 / 306

223
© Tieline Research Pty. Ltd. 2021
Gateway and Gateway 4 Manual v1.2
23.38
Adjusting Codec Time and Date
Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer
systems over packet-switched, variable-latency data networks. By default
Use NTP time is enabled
in the codec and it will synchronize with ntp.tieserver.com . When the codec is attached to a
network it will automatically ping the selected NTP server every two hours and update the time in the
codec. It is also possible to manually synchronize the time. Note: The codec will not ping a server
while connected.
To manually synchronize time settings in the codec:
1. Open the HTML5 Toolbox Web-GUI and click Settings in the Menu Bar , then click Date &
Time to display the Date & Time panel .
2. Click Force Sync to NTP Time to manually synchronize the codec to NTP time.
Important Notes:
· It may take more than one attempt to Force Sync to NTP Time .
· When NTP address settings are configured and enabled, the codec will immediately jump
to the new time when synchronized to the server. This may cause scheduled events to be
missed.