Codec Tieline Gateway, User Manual

Page: 140 / 306

140 Gateway and Gateway 4 Manual v1.2
© Tieline Research Pty. Ltd. 2021
Click to configure:
·
Auto Jitter Adapt and the preferred auto jitter setting using the drop-down arrow for
Buffer priority . It is also possible to configure the Minimum depth and Maximum
depth of jitter over the connection. See Configuring the Jitter Buffer for more details.
·
Alternatively, select a Fixed Buffer Level and enter the Jitter Depth , which must
be between 12ms and 5000ms depending on the algorithm you select.
Select Add a SmartStream PLUS Connection to configure redundant IP streaming.
Alternatively, click Next to configure Auto Reconnect or a failover connection, whereby
the alternative connection is dialed if the primary connection fails.
By default, primary IP streaming is via LAN1 . To achieve the maximum level of
redundancy select Secondary to configure redundant streaming from the secondary IP
port LAN2 . The redundant stream uses Remote Audio Port 9001 by default and the
Local Audio Port allocated is Automatic . Note: Automatic indicates that the codec will
arbitrarily allocate the local port value and send this information to the codec to which you
are dialing.