Codan 8525B Series, Handbook

Page: 64 / 189

Using selective call
5-12 Outback HF Radiophone
Enabling a channel for selective call
This procedure explains how to enable an existing programmed channel for selective
calling. To achieve this you are required to copy the existing programmed channel
into the P-channel program, as outlined below.
This procedure is similar to Enabling a channel for tone call in section 8.
The displays in this section will vary depending on the channel you select.
Step Action… Display shows… Remarks…
1. Use the Select
Channel or
Channel and
buttons to
find the channel
you wish to
enable.
An example for channel
29.
Refer to section 4,
Selecting channels.
2.
Press
Enter
You will hear a ’pip’.
3. Press
Enter
You will hear a ’pip’.
The display shows the
individual options for the
chosen channel.
F