Codan 8525B Series, Handbook

Page: 108 / 189

Using tone call
Outback HF Radiophone 8-3
Setting up tone call
This procedure is similar to setting up selective call. Once in the set-up mode, you can
skip through the non-important steps by pressing the Enter button.
Step Action… Display shows… Remarks…
1. To start the set-up
mode, hold down
Call
Selective
and press
On/Off
Hold the Call button
down for approximately
three seconds.
This turns the
Radiophone on, and into
the preamble set-up
mode.
2. Press
Enter
This set-up is not
required.
3. Press
Enter
This set-up is not
required.
4.
Press
Enter
This set-up is not
required.
5. Press
Enter
This part of the
procedure allows you to
enter the tone calling
frequencies.
F